| IKO CF8BUUR Cam Follower and Track Roller - Stud Type | Brand:KOYO; Weight:67,5 Kg; A2:35 mm; L:410 mm; N:41 mm; Basic static load rating (C0):214 kN; A1:45 mm; Bolt (G):M36; Basic dynamic load rating (C):229 kN; Bearing number:UKFS326; |
| IKO NART50UUR Cam Follower and Track Roller - Yoke Type | A:40 mm; nG:2240 1/min / Limitin; D1:93 mm; Bearing number:53318; Size (mm):90x155x54.6; rmin:1,5 mm; d:90 mm; Da max:120 mm; Outer Diameter (mm):155; D:155 mm; |
| 0.236 Inch | 6 Millimeter x 0.472 Inch | 12 Millimeter x 0.472 Inch | 12 Millimeter IKO TAF61212 Needle Non Thrust Roller Bearings | d:44,45 mm; B:21,692 mm; Width (mm):26,988; R:2,3 mm; Bearing number:355/3525; C:23,812 mm; Size (mm):0.236 Inch | 6 Millimeter x 0.472 Inch | 12 Millimeter x 0.472 Inch | 12 Millimeter ; r:3,3 mm; Brand:Timken; Bore Diameter (mm):44,45; |
| IKO CF30-1VBR Cam Follower and Track Roller - Stud Type | d:45 mm; Da - max.:64.8 mm; Outer Diameter (mm):45; Size (mm):68x45x30; ra - max.:0.6 mm; Width (mm):30; Basic static load rating - C0:104 kN; da - max.:51 mm; Fatigue load limit - Pu:12.2 kN; Brand:SKF; |
| 1.575 Inch | 40 Millimeter x 1.772 Inch | 45 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ404530 Needle Non Thrust Roller Bearings | Brand:SKF; C:30 mm; Weight:0,021 Kg; Fw:20 mm; Size (mm):1.575 Inch | 40 Millimeter x 1.772 Inch | 45 Millimeter x 1.201 Inch | 30.5 Millimeter ; Bearing number:LBBR 20; Width (mm):30; Basic dynamic load rating (C):1,16 kN; Bore Diameter (mm):20; D:28 mm; |
| IKO CF12-1VBUUR Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):35; Angle (α):25 °; Basic dynamic load rating (C):10 kN; Bore Diameter (mm):15; Size (mm):15x35x15.875; (Grease) Lubrication Speed:11000 r/min; D:35 mm; C:15,875 mm; Brand:FBJ; d:15 mm; |
| IKO CFES18B Cam Follower and Track Roller - Stud Type | Bearing number:542853 A.HT10; Size (mm):30x72x19; C:19 mm; Outer Diameter (mm):72; D:72 mm; Bore Diameter (mm):30; d:30 mm; B:19 mm; Brand:TORRINGTON; Width (mm):19; |
| IKO CF12-1VR Cam Follower and Track Roller - Stud Type | G2 - Heat Generation Factor (Rib-Roller End):175.8; r - Cup Backface To Clear Radius2:3.30 mm; Ab - Cage-Cone Frontface Clearance:1 mm; e - ISO Factor8:0.4; Cone Part Number:LM545849E; db - Cone Backface Backing Diameter:251.97 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:32600 lbf; B:49.215 mm; R - Cone Backface To Clear Radius1:3.560 mm; Cage Type:Stamped Steel; |